RADCAL: Dynalyzer

USED WORLDWIDE FOR -			MEASURE -
	•	X-ray machine manufacturing		•	kVp (anode, cathode, and anode + cathode)
	•	Troubleshooting		•	mA and mAs Anode current
	•	Annual Calibration		•	Filament current
	•	Installation		•	Exposure time
	•	Acceptance Testing

DYNALYZER IIIU HIGH VOLTAGE UNIT - The Dynalyzer IIIU is one of the most accurate tools for the calibration and analysis of x-ray generator systems.

Connected between the generator and the x-ray tube unit, it isolates the signals and provides an output proportional to kV, mA and filament current. These ground-referenced analog signals may be routed to external test equipment, such as the Dynalyzer III digital Display or an oscilloscope. Unlike non-invasive instruments, the Dynalyzer provides the user with direct kV measurements unaffected by tube target material or filtration.


	Measure kVp		Quickly and accurately measure without a scope
	Measure Fluoro		Generator parameters measured in real-time with "Auto Trigger" mode
	kV Delay		Use of kV Delay allows user to ignore overshoot
	Exposure Recall		Allows user to display up to 10 previous exposures
	Coefficient of Variation		Accessible with just the touch of a button

HIGH VOLTAGE TERMINALS


	Federal Standard X-ray cable receptacles (3-conductor) conform to US Federal Standards 72


kV Accuracy	± 1%	10 kV to 150 kV
Anode Current	± 2%	1 mA to 2 Amps(8ms pulse maximum) Selectable sensitivity for more accuracy at low mA

Filament Current	± 1% db (12%)	DC to 20 kHz
All specifications subject to change.

DYNALYZER III DIGITAL DISPLAY / PRINTER -As an element of the Dynalyzer system, the Digital Display provides a wide range of x-ray measurement features for rapid calibration, compliance testing, and trouble- shooting. It may be used with the Dynalyzer II, III, IIIA-CT IIIU High Voltage Unit, conventional oscilloscope and voltmeter for complete analysis.

Dynalyzer III Digital Display / Printer Line Drawing


kV Accuracy	± (0.75 kV + 0.5%)	10 kV to 150 kV
Anode Current	± 2%	1 mA to 2 Amps
Filament Current	± (0.05A + 0.7%)
Exposure Time	± (0.25 ms + 0.5%)
All specifications subject to change.

•	Dynalyzer IIIU High Voltage Unit comes standard for 3 conductor applications. Includes two 12 foot
Refer to Radcal price list for other options and accessories
	coaxial cables and dummy plugs. (4 conductor applications Dynalyzer available on special request)
•	Heavy duty shipping container (M-96321) for Dynalyzer III Digital Display (M-96320P) (order separately)
•	Heavy duty shipping container (M-96115) for Dynalyzer IIIU (M-96311) (order separately)
•	High voltage cables (two 5-foot cables recommended)